·Full Access to the Neck - recessed heel
·Hardened Steel Plate Floyd Rose Tremolo
·24 Jumbo Frets with a Bound Ebony Fingerboard

Neck Shape & Feel Designed in the USA by U.S. Masters
Unique Viper neck designed in the U.S.A. by U.S. Masters. Designed for superior performance, sound quality and playability; for long-term service and operation. Years of experience designing and making some of the world's finest guitars.The design was based off U.S. Masters acclaimed High Performance series neck; and with it's ergonomic design: "sleek, fast, rock solid" are all words players have used to describe the neck. The Viper neck is 25-1/2" bolt-on neck.

Full Access to the Viper Neck
Play leads up to the 24th fret without the neck shape changing, and without interference from the body or the neck joint. This is made possible due to the LG's smaller neck joint and contoured low profile heel.

Recessed Heel
When you're playing at the top of the neck, the heel won't block your hand,
especially critical for those players that wrap their thumb around the neck!
You'll truly know the feeling of "TOTAL ACCESS".

Hardened Steel Plate Floyd Rose Double-Locking Tremolo
From the same people that make the Original Floyd, this has the hardened steel plate so your knife edge lasts and the tremolo action stays smooth and faithfully returns to pitch. And, it has the zinc saddles instead of steel which take the harshness off the tone that you get with steel saddles. It's also mounted with studs and anchors, it's the best combination of metals for a Floyd, you get long-term reliable performance and the best sustain and tone. And, you get the most well made Licensed Floyd Rose on the planet. This is one of the most costly of the Licensed Floyds, but the tone, sustain, durability and performance make it worth every cent.

Screw-on Adjustable Tension, Removable Trem Arm
It's quick and easy to put on and take off when you put the guitar in its case. You can control the tension on the arm simply by tightening the knurled nut with your fingers. You can let the arm hang loose, keep it under a little tension or tighten it so it stays in whatever position you desire.

Recessed Spring Cover
Many guitars have the cover sticking out. Then they catch on your clothes, the guitar doesn't lay flat of solid while you make adjustments. It's just a cheap, budget way to make a guitar. LG507's cover plates are recessed. It costs a little more, but it's the right way to make it.

Wilkinson Premium Tuning Machines
Made with a level of precision and a tighter design, they are so solid, precise and smooth, outperforming all of the name-brand machines you find on import guitars. They're a bit more expensive, but they work so much better, it's worth it.

Double Action 2-way Truss Rod
The truss rod we use adjusts the neck either way so you can easily maintain the lowest, easiest to play action, even in areas where there are drastic climate changes from summer to winter.

Rock Maple Neck with Oil Finish
Rock maple gives you better tone, sustain, stability and durability. It also gives you that fast, broken in, easy playing feel with the oil finish.

Pearl Swoosh Inlays
Real Mother of Pearl in our unique Masters Design Swoosh Inlay pattern - understated and classy, with a look of its own.

Angled Headstock
No string bar needed, easier to string, adust and tune. Abalone inlay logo

HSH Pickup Set
Humbucker-Single-Humbucker with a 5-way switch, giving you smooth focused lead tones and solid chording. A wide range of good useful sounds.

Direct-mounted Pickups
It's always been felt that direct-mounted pickups give a little better sound, they aren't vibrating on spring mountings.

Shielded Leads and Control Cavity
...cuts down on noise, especially important if you're using high gain amps or a lot of processing.

Well-Balanced Comfortable Body Design
It sits on your body just right, not neck heavy. Forearm relief so the body doesn't cut into your forearm and rear relief so the body doesn't push into your ribs. 38-1/4" overall length, 12-1/2" wide, 7-1/2 lbs. approximate weight

LG507 Comes with a Hardshell Case
We were impressed by the case the first time we saw it. This is plywood construction, a good, solid well-made case.

Finishes
Currently available finishes: black, metallic red, metallic blue

U.S. Masters Guitar Works is a product of M-Tec Corp.
2324 Pinehurst Dr. Unit B Middleton, WI 53562
608-836-5505 Fax:608-836-6530